Net-safety固定式火焰探測器技術一覽表

日期：2025-11-17 18:27

瀏覽次數：2151

摘要：

Net-safety固定式火焰探測器技術一覽表

1,PHOENIX TRIPLE IR FLAME DETECTOR

Very serious risks to human life, productivity and equipment are always present at industrial facilities that store, transport and process flammable or explosive chemicals. Automatic flame detection and protective action must be initiated within seconds whenever a fire ignites. Net Safety's Phoenix Triple IR Multi-spectrum flame detector ensures the reliable and instantaneous flame detection response that is required in high-risk applications by utilizing advanced technologies to reduce false alarm events and provides rock-solid performance in any environment.

The Phoenix will only alarm when input conditions from three distinct IR wavelengths found in fires are satisfied. The Phoenix also incorporates our unique Automatic Digital Zoom (ADZ) technology which provides accurate detection of small and massive flames in the most difficult working situations where other detectors fail. Three precisely tuned IR sensors, ADZ technology, user selectable sensitivity, and time delay settings greatly extend the Phoenix Triple IR detection range, providing unparalleled false alarm immunity and detection performance.

The Phoenix Triple IR is the ONLY flame detector on the market that does not have an external reflector or light source. Experience has shown that external reflectors and light sources often become obscured by industrial dirt and corrosion which causes unwanted fault alarms that requires difficult and costly maintenance to correct. The Phoenix Triple IR flame detector completely eliminates these issues in applications where salt, dust, petroleum vapor, heavy rain, snow or blowing sand are present. Our proprietary Automatic Visual Integrity testing technology continuously checks optical surfaces for contaminants while at the same time verifying functionality of the sensors and circuitry [ read whitepaper ].
Lowest Power Possible

Net Safety has engineered a superior and affordable, multi-spectrum IR flame detector that is simple to operate and maintain while delivering all the security and performance required for high-risk industrial installations!

SPECIFICATIONS SHEET | PRODUCT MANUAL

NO REFLECTOR! - No Other Detector On The Market Can Offer This Advanced Technology Greatly Reduces Faults And Maintenance Especially In Extreme Applications Where Salt, Heavy Rain, Sand Or Snow Are Constantly Present, Conditions Which Can Create Serious Performance Issues With Some Detectors
Market-Leading 7 Year Warranty
Automatic Visual Integrity Testing Continuously Checks Optical Surfaces For Contaminants
Proprietary Automatic Digital Zoom (ADZ) Technology Eliminates False Alarms While Maximizing Detection Sensitivity
Lowest Power Requirements - Widest Input Power Range
Up to 89% lower power draw compared to our competitor's products! Allows for longer power separation, lower installation and energy costs, and greatly increased system stablility. [ LEARN MORE ]
Global Certification and Approvals - CSA, ANSI-UL/ISA, ATEX, INMETRO, and GOST-R Certified Class 1, Division 1 Explosion proof - FM Performance Certified - SIL2 By exida - ABS Marine Approved
High False Alarm Immunity To Lightning, Arc Welding, Sparks/Arcs; Solar Blind
Multiple Output Options - Analog, Relay, Digital RS485 Modbus RTU protocol, and HART Communication protocol with optional ground-level HART Communicator input
Field Adjustible Sensitivity And Time Delay Settings Allows For Easily Enhanced Application Performance
Full 90 Degree Field Of View With Extended Detection Range
Normal, Fire And Fault status LEDs Are Visible In All Lighting Conditions (Both Sunlight And Darkness)
Early Warning Detection For An Extremely Fast Response (Within 500 Milliseconds) To A Potential Flame
Rugged Design Includes Conformal Coated Circuit Boards And Weather-Proof Housing To Withstand Extreme Conditions - Operating Range Of -50°C to +75°C - Operates Flawlessly In Heavy Rain/Fog Where Some Detectors Go Into Fault Or Fail

2,ULTRA-VIOLET/INFRARED FLAME DETECTOR

Net Safety's Ultra-violet/Infrared ( UV/IR ) flame detector delivers high performance security with functions and features that set it apart. The flame detection reacts to both UV and IR flame radiation delivering accurate and reliable fire monitoring, yet is immune to arc welding, hot body radiation, lightning or sunlight. Two spectrums of radiation must be recognized and confirmed by precisely tuned sensors for the UV/IR to initiate a fire condition, greatly reducing false alarms while providing critical safety performance to your site and personnel.

Enclosed in a rugged, explosion-proof housing, the Net Safety UV/IR flame detectors use the latest in modular microprocessor and UV/IR sensor technology - delivering accurate and reliable monitoring for hydrocarbon fires. It's capable of stand-alone operation or can be connected to a variety of control devices to create a dependable fire monitoring system. The user can define sensitivity and time delay settings and the built-in testing routines ensure continous operation.

The UV/IR Flame Detector has a extra wide field of view - up to 120 degrees, it has one of the lowest power consumption levels available on the market and a wide voltage range - all of these factors can lower your overall cost of ownership during design, installation and power draw requirements. This can add up to thousands of dollars PER DETECTOR over it's installation.
Lowest Power Possible

Net Safety has engineered a superior and affordable, UV/IR flame detector that is simple to operate and maintain while delivering all the security and performance required for high-risk, industrial installations!

SPECIFICATIONS SHEET | PRODUCT MANUAL

Two radiation sources necessary for alarm - Minimize false alarms events
Field of view of up to 120 degrees - Wide coverage per detector
Explosion-proof, Class I, Division 1 certified - Suitable for hazardous locations
Low Power Consumption, Wide Voltage Range - Lower overall costs, voltage drops non-issue
FM, CSA, ANSI/UL, ATEX, INMETRO, and GOST-R certified - Engineered to the highest international standards
Multiple Output Options - Analog, Relay, Digital RS485 Modbus RTU protocol, and HART Communication protocol with optional ground-level HART Communicator input
Connect indoors and out, directly or up to 2000 feet away - Flexible installation
Immune lightning, arc welding, sunlight and hot body radiation - Limits false alarms caused by nearby activities
Adjustable swivel mount - Simplifies installation and lowers cost
User programmable sensitivity and time delay settings - Fine tune performance to specific applications
Multi-colored, high intensity LEDs - Visual detector status in the field
Manual and automatic testing of optical surfaces - Allows maintenance scheduling by evaluating cleanliness
Watchdog timer monitors internal electronics - Continuous system self-diagnosis

3,SINGLE ULTRA-VIOLET FLAME DETECTOR

Net Safety's Single UV flame detector reacts to the ultraviolet radiation found in hydrocarbon fires, delivering accurate and reliable fire monitoring. The Single UV does not react when exposed to incandescent or fluorescent lighting, heaters or sunlight - meaning false alarms are virtually eliminated.

Enclosed in a rugged, explosion-proof housing, the Single UV uses the latest in microprocessor and UV sensor technology. It is capable of stand-alone operation or can be connected to a variety of control devices to create a dependable flame monitoring system. The user can define sensitivity and time delay settings to virtually eliminate false alarms and the built-in testing routines ensure continuous operation.

The Single UV has a Field of View of up to 120 degrees and is available with analog, analog/relay, analog/HART, or analog/relay/HART output configurations for 12 or 24 VDC systems - just let us know your requirements!

Lowest Power Possible

Net Safety's Single UV flame detector is globally certified Class I, Division 1 for hazardous locations to CSA, ATEX, Factory Mutual (FM), ANSI-UL/ISA, INMETRO, and GOST-R performance, technical and safety standards.

Net Safety has engineered a cost effective, high-performance flame detector, ideal for even the most high-risk, industrial applications!

SPECIFICATIONS SHEET | PRODUCT MANUAL

Field of view of up to 120 degrees - Wide coverage per detector
Explosion-proof, Class I, Division 1 certified - Suitable for hazardous locations
Low Power Consumption, Wide Voltage Range - Lower overall costs, voltage drops non-issue
FM, CSA, ANSI/UL, ATEX, INMETRO, and GOST-R certified - Engineered to the highest international standards
Multiple Output Options - Analog, Relay, Digital RS485 Modbus RTU protocol, and HART Communication protocol with optional ground-level HART Communicator input
Connect indoors and out, directly or up to 2000 feet away - Flexible installation
Immune to sunlight and hot body radiation - Limits false alarms caused by nearby activities
Adjustable swivel mount - Simplifies installation and lowers cost
User programmable sensitivity and time delay settings - Fine tune performance to specific applications
Multi-colored, high intensity LEDs - Visual detector status in the field
Manual and automatic testing of optical surfaces - Allows maintenance scheduling by evaluating cleanliness
Watchdog timer monitors internal electronics - Continuous system self-diagnosis

4,HYDROGEN FLAME DETECTORS

Net Safety's Hydrogen flame detectors are specially tuned for non-hydrocarbon based flame applications where accurate and instant detection of difficult to see hydrogen and silane fires is required. Our advanced optical sensors ensure the greatest degree of UV ( ultraviolet ) and IR ( infrared ) spectral bandwave matching to the radiant energy emitted by invisible hydrogen and silane flame - and the lowest degree of matching to non-fire stimuli. This provides ultra-fast alarm, an unparalleled level of false alarm immunity, as well as a Field-of-View unmatched in the industry - a full 130° horizontal!

Enclosed in a rugged, explosion-proof housing, the UVS-H2 and UV/IRS-H2 are engineered for extreme applications and utilize the latest in SMART microprocessor sensor technology. They're capable of stand-alone operation or can be connected to a variety of control devices to create a dependable fire monitoring system. The field user can define sensitivity and time delay settings to further enhance false-alarm immunity and the built-in testing routines ensure continuous operation.

The UVS-H2 and UV/IRS-H2 are ideally suited for any specialized applications where response time and a wide FOV are most critical ' industrial and commercial locations that utilize hydrogen fuel cells, hydrogen gas generators, hydrogen refilling stations, and storage tanks as well as semiconductor facilities where silane combustion risks are present.

Net Safety's UVS-H2 and UV/IRS-H2 flame detectors are globally certified Class I, Division 1 for hazardous locations to CSA, ANSI-UL/ISA, and ATEX technical and safety standards.

Net Safety has engineered a cost effective, high-performance hydrogen flame detector - ideal for even the most high-risk, industrial applications!

SPECIFICATIONS SHEET | PRODUCT MANUALS

Field of view of up to 130 degrees with <2 second response time!
Detects Invisible Hydrogen and Silane Flame
UV or UV/IR Sensor Options Available
Explosion-proof, Class I, Division 1 certified
CSA, ANSI-UL/ISA, and ATEX certified
Multiple Output Options - Analog, Relay, Digital RS485 Modbus RTU protocal, and HART Communication protocal with optional ground-level HART Communicator input
Connect indoors and out, directly or up to 2000 feet away
Immune to lightning, arc welding, sunlight and hot body radiation
(UV/IRS-H2 has higher immunity than the UVS-H2)
Adjustable swivel mount included
User programmable sensitivity and time delay settings
Multi-colored, high intensity LEDs
Manual and automatic testing of optical surfaces
Watchdog timer monitors internal electronics

5,FLAMEWATCH II-FLAME DETECTOR&VIDEO CAMERA

Bringing two technologies together...for enhanced protection. The FlameWatch II system is designed specifically for applications where a high performance flame detection solution and visual analysis/record of an alarm event is required. These capabilities are ideally suited for remote locations in order to quickly evaluate the hazard from a controlled location and effectively mobilize response teams.

The FlameWatch II system is available with our entire line of advanced flame detection solutions - UV, UV/IR, Phoenix Triple IR flame sensors. The entire package includes Class 1, Division 1, Groups BCD certification; CSA/ATEX certifications, FM Approvals (flame detector only), NEMA 4X explosion proof rated housings; and is available in aluminum or stainless steel. With all the innovative design features from our entire flame line included, this package ensures a simplified installation, rock-solid performance, and lower maintenence costs.

The FlameWatch II full colour, composite video signal easily integrates into a wide array of industry standard CCTV hardware and software security systems with both NTSC and PAL formats. The wide field of view provides large area coverage by a single camera and the high resolution video sensor captures accurate detail of the area being monitored.

The FlameWatch II provides the unique integration of an industrial flame detector with an explosion proof video camera — delivering the complete safety and security package for your application.

SPECIFICATIONS SHEET | PRODUCT MANUAL

Multiple Flame Detection Configurations - Available with SMART UV, UV/IR, and Triple IR sensors
Explosion-proof, Class 1, Division 1 - Suitable for hazardous locations
Easy to Install, Configure and Calibrate - Lower field operating and emergency response costs
Review Alarm Events - High quality video can reviewed to determine cause and evaluate response
Field Adjustable Sensitivity - In situ settings for sensitivity and response greatly reduces false alarm
Wide Field of View and Fast Response - Superior protection for plant and personnel

下一篇： Wasson-ECE專門致力于用戶自定義的應用，設計滿足您特定的色譜需求。
上一篇： Net-safety氣體探測儀系列產品

久久性色av_日本中文字幕视频一区_狠狠色综合色区_亚洲小视频在线观看

Net-safety固定式火焰探測器技術一覽表